Teaching hospital · Department planning
Biomedical Engineering
These are the items commonly listed for the Biomedical Engineering department. Tick the ones you need in your list and add your own quantities.
- 22items listed
- 1groups
- 22named in official documents
22 items in 1 groups below. Tap a group to open it; tap “About this item” to read more. Lists are for planning; please follow current official norms.
What the regulations say
22 of 22 items on this page are named in MoHFW 2024 guideline. 0 have a figure that depends on MBBS seats.
Figures come from NMC and government documents dated up to February 2026. Many are minimums. Items marked in grey are government benchmarks (for example IPHS 2022), not binding on private colleges. Check the current official norms before ordering.
Test equipment (district-hospital level)
22 items
NIBP simulator MoHFW 2024 guidelineAbout this item
What it is: A device that imitates the pressure signals of a patient's arm for automatic blood pressure monitors.
How it is used: Used by biomedical engineering to test non-invasive blood pressure (NIBP) monitors without a patient.
Used in: Biomedical Engineering
Patient monitor simulator MoHFW 2024 guidelineAbout this item
What it is: A device that produces artificial ECG, breathing, temperature and blood pressure signals.
How it is used: Used by biomedical engineering to test patient monitors and ECG machines and to check their alarms.
Used in: Biomedical Engineering
Options: Some models combine many signal types in one unit.
SpO2 simulator MoHFW 2024 guidelineAbout this item
What it is: A device that imitates a finger so a pulse oximeter can be tested.
How it is used: Used by biomedical engineering to check pulse oximeters (SpO2 meters) read oxygen level and pulse rate correctly.
Used in: Biomedical Engineering
Incubator / radiant warmer analyser MoHFW 2024 guidelineAbout this item
What it is: A test device that measures temperature, humidity, airflow and sound inside infant incubators and radiant warmers.
How it is used: Used by biomedical engineering to check that newborn care equipment keeps babies in safe conditions.
Used in: Biomedical Engineering
Irradiance meter MoHFW 2024 guidelineAbout this item
What it is: A hand-held meter that measures how strong the light from a phototherapy unit is at the level where the baby lies.
How it is used: Used in newborn units and by biomedical engineering staff to check that phototherapy lights give enough light to treat jaundice effectively.
Used in: Biomedical Engineering, NICU / SNCU
Options: Meters differ in the light range measured and in whether they suit LED or tube-based phototherapy units.
Gas flow / ventilator analyser MoHFW 2024 guidelineAbout this item
What it is: An instrument that measures gas flow, pressure, volume and sometimes oxygen level from breathing equipment.
How it is used: Used by biomedical engineering to test and calibrate ventilators and anaesthesia machines.
Used in: Biomedical Engineering
Defibrillator analyser MoHFW 2024 guidelineAbout this item
What it is: A test device that measures the energy delivered by a defibrillator (a machine that shocks the heart).
How it is used: Used by biomedical engineering to check that defibrillators deliver the set energy and work correctly.
Used in: Biomedical Engineering
Options: Some models also test pacing functions and simulate heart rhythms.
Electrical safety analyser MoHFW 2024 guidelineAbout this item
What it is: A test instrument that checks medical equipment for electrical safety, such as leakage current and earthing.
How it is used: Used by biomedical engineering during routine checks and after repairs to make sure equipment is safe for patients and staff.
Used in: Biomedical Engineering
Options: Buyers choose between manual and automated models with report printing.
Electrosurgical unit analyser MoHFW 2024 guidelineAbout this item
What it is: A test device that measures the output power of electrosurgical units (diathermy machines used to cut tissue and stop bleeding).
How it is used: Used by biomedical engineering to check that diathermy machines deliver correct power and are safe.
Used in: Biomedical Engineering
Foetal simulator MoHFW 2024 guidelineAbout this item
What it is: A device that produces artificial foetal heart signals.
How it is used: Used by biomedical engineering to test and check foetal monitors and CTG machines without a patient.
Used in: Biomedical Engineering
Infusion pump analyser MoHFW 2024 guidelineAbout this item
What it is: A device that measures the flow rate, volume and blockage alarms of infusion and syringe pumps.
How it is used: Used by biomedical engineering to check that pumps deliver fluids accurately.
Used in: Biomedical Engineering
Options: Variants differ in the number of channels tested at once.
Ultrasound phantom MoHFW 2024 guidelineAbout this item
What it is: A test block made of material that behaves like body tissue under ultrasound, with built-in targets.
How it is used: Used to check ultrasound machine image quality and for training students in ultrasound scanning.
Used in: Biomedical Engineering
Options: Variants include general quality-check phantoms and training phantoms for specific procedures.
CT phantom MoHFW 2024 guidelineAbout this item
What it is: A test object with known internal structures that is scanned in a CT scanner instead of a patient.
How it is used: Used by biomedical and radiology staff to check CT image quality, accuracy and scanner performance during quality checks.
Used in: Biomedical Engineering
Options: Variants differ by the type of image quality tests built into the phantom.
MRI phantom MoHFW 2024 guidelineAbout this item
What it is: A test object filled with known materials that is scanned in an MRI machine instead of a patient.
How it is used: Used to check MRI image quality, uniformity and accuracy during quality assurance.
Used in: Biomedical Engineering
Mammography phantom MoHFW 2024 guidelineAbout this item
What it is: A test object that imitates breast tissue with known small details.
How it is used: Used to check image quality and performance of mammography machines during routine quality checks.
Used in: Biomedical Engineering
OCT phantom MoHFW 2024 guidelineAbout this item
What it is: A test object used with optical coherence tomography (OCT), an eye and tissue imaging system.
How it is used: Used to check image quality and measurement accuracy of OCT machines.
Used in: Biomedical Engineering
Radiation survey meter MoHFW 2024 guidelineAbout this item
What it is: A hand-held instrument that detects and measures radiation levels.
How it is used: Used in radiology and nuclear medicine areas to check radiation levels around X-ray rooms and equipment for safety.
Used in: Biomedical Engineering
Dialysis reference meter MoHFW 2024 guidelineAbout this item
What it is: A reference instrument for measuring dialysis fluid properties such as conductivity, temperature, pressure and pH.
How it is used: Used by biomedical engineering to verify and calibrate dialysis machines.
Used in: Biomedical Engineering
Conductivity meter MoHFW 2024 guidelineAbout this item
What it is: An instrument that measures how well a liquid conducts electricity, which shows how much dissolved salt it contains.
How it is used: Used by biomedical engineering to check dialysis fluid and purified water used in the hospital.
Used in: Biomedical Engineering
Options: Buyers choose between hand-held and bench-top meters.
Lux meter MoHFW 2024 guidelineAbout this item
What it is: A hand-held meter that measures how bright the light is on a surface.
How it is used: Used to check lighting levels in operating theatres, wards, labs and examination areas, and to test examination lights.
Used in: Biomedical Engineering
3-litre calibration syringe MoHFW 2024 guidelineAbout this item
What it is: A large, precisely sized syringe that pushes a known volume of air.
How it is used: Used by biomedical engineering to check and calibrate spirometers and other lung function equipment so their readings are accurate.
Used in: Biomedical Engineering
Reference weights and thermometers MoHFW 2024 guidelineAbout this item
What it is: Certified weights and accurate thermometers used as a standard to compare other instruments against.
How it is used: Used by biomedical engineering and labs to check weighing scales, incubators, refrigerators and other temperature equipment.
Used in: Biomedical Engineering
Options: Buyers choose weight sets and digital or probe-type reference thermometers.
How Unnat Exports helps with Biomedical Engineering
- One list, one quotation
Every item for Biomedical Engineering, from equipment to furniture, quoted together, item-wise, with GST shown.
- Matched to the documents
Item names follow the wording used in NMC and government planning documents, so your list reads the way inspectors expect.
- Help with specifications
Not sure which model or size? Our team goes through the options with you before quoting.
- Supply across India
Delivery and installation for your city are confirmed in the quotation.
Before you finalise your Biomedical Engineering list
- Check your MBBS intake and any PG seats; several quantities scale with them.
- Compare the list with the current official norms for your college. The table above shows which items the documents name.
- Measure the rooms, labs or wards so furniture and equipment fit.
- Decide which items you already have and which need replacing.
- Note any tender or department specifications you must follow.
Send this checklist with your list and we will quote against it.
Common questions
What does Unnat Exports supply for the Biomedical Engineering department?
Items from the test equipment (district-hospital level) groups on this page. Most of them fall under biomedical test & calibration equipment, obstetrics, gynaecology & neonatal care.
Do I have to buy everything on this list?
No. The list shows items commonly bought for this department. You choose the items and quantities you need; every quantity box starts empty.
Is this the official list of requirements?
No. It is a planning list to help you prepare your purchase. Please check the current official norms that apply to your college, such as the National Medical Commission documents, before you finalise quantities.
How do I get a quotation for Biomedical Engineering?
Open the list builder, tick the items, type your quantities and send the list. You can also send the list you already have on WhatsApp at 94674 67836.
Can you help me choose models and specifications?
Yes. When you send your list, tick “I need help choosing specifications” and our team will call you to go through the options before quoting.
Ready to get a quotation?
Tick what you need, type your quantities, and send the list to Unnat Exports. Or just message us on WhatsApp.